Synergy can design, engineer, and manufacture almost any size gangway or loading platform. Additionally, we can also design an appropriate handrail for your gangway or loading platform. In most instances, handrails are necessary to ensure the safety of those persons using the gangway or loading platform.
Our Walk Boards are mounted on the cradle beams and are available in different lengths and widths. Our most common size Walk Board is 20′ x 16″ and is available up to 32′. If you do not have a wrap-around dock, Walk Boards are a great addition to our boat lifts allowing you to service your boat (wash, clean, polish, load and unload). One or two Walk Boards can be attached to either the port or starboard side of your boat lift or both sides. Also, steps can be added to a Walk Board for easier access to your boat. Additionally, we can add service platforms to aid you in servicing your engine.
Our Shallow Water Cradles are designed for those applications where the water depth is much shallower near the seawall side of the lift than it is on the open water side of the lift. Our cradle support seawall side beams are angled upwards in such a fashion that they allow the cradle support beam on the open water side to ride much deeper than the seawall side of the cradle support beam. This application has solved many concerns of boat lift owners as to how can they get a boat lift to work properly on their property.
Making your boating experience easier and better. Our GDL (Gear Driven Limit Switch) lifts allow you to pre-set the lower and upper limits that the cradles will travel. In other words, if you forget to stop the lift as it is going down or up, you do not have to worry about the cradles resting on the bottom or being too high where it may damage your canopy or boathouse. This is a great safety feature.
Our GD (Gear Driven) lifts are also compatible with our remote control, but they do not feature a limit switch.